Showing all 5 results
£412.00
£443.00
£493.00
£468.00
£512.00
The Calpeda E-MXP is a pressurised system from Calpeda’s e-idos range, built on a horizontal multistage pump with the pressure transducer and electronic control integrated into the unit. It starts and stops automatically as outlets open and close, holding steady pressure for domestic water supply, garden use and irrigation. A non-return valve is built into the pump suction. Because the electronics handle pressure control directly, the E-MXP can reduce or remove the need for an expansion tank.
The range we list covers five single pump E-MXPM models on a 230V single phase supply, at 0.45 to 0.75 kW, with 1″ connections. The restart pressure is programmable, so the unit can be set to suit the system rather than the other way round. The controller also monitors voltage, current and maximum starting current, eliminates water hammer on start-up, and adds no hydraulic losses of its own. Browse all five below.
The high-efficiency asynchronous single phase motor meets IE2 class, with the capacitor under less voltage stress and lower running temperatures than a conventional arrangement. Protection covers dry running, air detection in the pump and filling cycle, overload and motor overheating, pump blockage, overcurrent, supply faults, system leakage, and high flow or piping failure. Liquid temperature range is 0°C to +50°C with ambient up to 40°C, maximum casing pressure is 8 bar, and the unit is rated for continuous duty.
If your questions have not been answered here, get in touch with our team for more information.
A horizontal multistage booster pump with the pressure transducer and electronic control built in. It starts and stops automatically as outlets open and close, and arrives ready to plug in and run.
A 230V single phase supply. The units are supplied with a fitted cable and plug, which is what makes them a plug and play installation.
0°C to +50°C, with ambient temperature up to 40°C. Maximum permissible pressure in the pump casing is 8 bar, and it is rated for continuous duty.
The E-MXP is a single pump with the electronics built into it. The MXP Series booster sets are twin pump units with a separate Easymat controller, manifolds and a base plate, for larger duties or where a second pump is wanted. Learn more on our MXP Series booster set pages.
Absolutely! If you’re unsure which pump is the best fit for your application, our team is here to help. You can pop up to our live chat for instant support, or simply send your requirements and pump details to sales@tfpumps.com. One of our experts will quickly recommend the most suitable pump for your needs.