Filters

Accessory Type

Aftermarket Brand

Balls

Body Material

Brand

Centre Section

Certifications

Diaphragms

Engine

Family

Float Switch

Impeller Material

Length

Material

Part Type

Piston Pump Type

Port To Port

Porting

Power

Pump Orientation

Pump Type

Seats

Size

System Type

Tubing Type

Voltage

Need Some Advice?

Contact Our Team

Two Body Sizes, One Reliable Family

The Nocchi Dominator is Pentair’s multistage submersible borehole pump, offered in 4-inch and 5-inch bodies. The Dominator 4 handles lighter domestic duties at up to around 115 litres per minute and heads to roughly 57 metres. The Dominator 5 pushes further, reaching 140 litres per minute and heads approaching 65 metres.

Built to Cope with Wear and Dry Running

Dominator 4 pumps use acetal resin impellers with polycarbonate diffusers, a double mechanical seal, and a hydraulic system that resists sand. Dominator 5 pumps step up to 316 stainless steel impellers and diffusers for better resistance to wear and dry running. Both share a stainless steel casing, suction screen and integrated non-return valve.

Manual or Automatic, Ready to Drop In

AUTO models arrive with a float switch fitted; MAN models are manual and can be paired with a pressure controller later. Everything runs on 230v single phase and discharges through a 1¼” BSP female outlet, with Dominator 4 units supplied with 20 metres of cable and nylon rope. Keep them to clean water at up to 40°C.

FAQs

If your questions have not been answered here, get in touch with our team for more information.

Contact Our Team

Body diameter is the main difference: the Dominator 4 fits bores from 4 inches, the Dominator 5 needs 5 inches or more. The Dominator 5 also uses stainless steel hydraulics and reaches higher flows and heads, so it’s the more robust pick where your bore allows.

Dominator 4 models use acetal resin impellers with polycarbonate diffusers, keeping them light and cost-effective. Dominator 5 models use 316 stainless steel impellers and diffusers for extra wear and dry-running resistance.

MAN indicates a manual pump with no float switch fitted. AUTO indicates a float switch is included for automatic level control, which is useful in tanks where you want protection against running dry.

The hydraulic system is designed to resist the corrosive action of sand, and the suction screen filters larger debris. It’s still rated for clean water only, so persistent sand loading will shorten its life.

Absolutely! If you’re unsure which pump is the best fit for your application, our team is here to help. You can pop up to our live chat for instant support, or simply send your requirements and pump details to sales@tfpumps.com. One of our experts will quickly recommend the most suitable pump for your needs.

Our Friendly Expert Team Are Here To Help.

Our Friendly Expert Team Are Here To Help.