Worldwide DeliveryWorldwide Delivery

Next Day DeliveryNext Day Delivery

Expert KnowledgeExpert Knowledge

SecureSecure Online Shopping

Basket

£0.00

Filters, Regulators & Lubricators

The use of Filters, Regulators and Lubricators keep your pump healthy and running smoothly. Filters, regulators, lubricators, and piggybacks can be combined together to form combinations. They are typically strung together in the F+R+L arrangement (three-piece combo) and F/R+L (two-piece combo) arrangement, although other configurations are also used depending on application needs.

Filters

Air filters are designed to remove airborne solid and liquid contaminants. Filters can be ordered with different elements, including coalescing models which are capable of removing oil aerosols and particles down to 0.3 micron.

Regulators

Regulators provide controlled, consistent air pressure as required for specific pneumatic equipment connected to the air system. Regulators are offered with a standard adjustment range of 0 – 140 psig (0 – 9.6 barg). Alternative spring ranges are offered for easy conversion to suit different requirements.
Non-relieving regulators are offered for applications where the venting of downstream overpressure is undesirable.

Lubricators

Mist-type lubricators help ensure that pneumatic devices receive the required lubrication to maintain peak performance, reduce wear, and prolong service life. They are designed to provide the correct amount
of oil required for most general applications in a pneumatic system, delivering a constant ratio of oil to air flow. Precise oil feed adjustment sets the proper oil drip rate. Lubricators should be installed close to the downstream application to ensure effective distribution of oil.

Filter-Regulators

Filter-regulators, or “piggybacks,” combine the functions of both a filter and regulator. Piggybacks are compact and most effective when space is a constraint. Piggybacks can be ordered with different filter elements and can be modified with different springs, depending on the filtration and air regulating requirements.

Home / Filters, Regulators & Lubricators

aro-flo piggyback Regulators / Filter

Piggyback Filter / Regulators

ARO compressed air filter/regulators are designed to remove airborne solid and liquid contaminant’s which may plug small orifices and hinder performance, or cause excessive wear and premature equipment failure.

1000 Series 1500 Series 2000 Series
3000 Series

aro-flo lubricators

Lubricators

ARO-Flo mist-type lubricators help ensure that pneumatic devices receive the required lubrication to maintain peak performance, reduce wear, and prolong service life.

1000 Series 1500 Series 2000 Series
3000 Series Super Duty Series

aro-flo combination

Combination

Filters, regulators, lubricators, and piggybacks can be combined together to form combinations. They are typically strung together in the F+R+L arrangement (three-piece combo) and F/R+L (two-piece combo) arrangement, although other configurations are also used depending on application needs.

1000 Series 1500 Series
2000 Series 3000 Series

aro-flo regulators

Regulators

Air line regulators provide controlled, consistent air pressure as required for specific pneumatic equipment connected to the air system.


1000 Series 1500 Series
2000 Series 3000 Series
Super Duty Series

aro-flo filters

Filters

ARO-Flo compressed air filters are designed to remove airborne solid and liquid contaminants.


1000 Series 1500 Series
2000 Series 3000 Series
Super Duty Series